D-Link DXS-3600 Series Reference Manual page 1128

Dxs-3600 series layer 2/3 managed 10gigabit ethernet switch
Hide thumbs Also See for DXS-3600 Series:
Table of Contents

Advertisement

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Parameters
SECONDS
Default
By default, this value is 30 seconds.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to configure the SIM interval in seconds for single IP management protocol
sending messages.
Example
This example shows how to configure the interval for the single IP management protocol.
Switch# configure terminal
Switch(config)# sim interval 60
Switch(config)#
96-6 sim management vlan
This command is used to configure SIM management VLAN. Use the no form of the command to revert
to the default setting.
sim management vlan VLAN-ID
no sim management vlan
Parameters
VLAN-ID
Default
By default, this option is set the VLAN 1.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
The single IP management group commander and member will send and receive the SIM message on
the SIM management VLAN.
Example
This example shows how to configure the single IP management VLAN to 100.
Switch# configure terminal
Specifies the interval value in seconds. The range is from 30 to 90.
Specifies the single IP management message VLAN.
1128

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-3600-32s

Table of Contents