D-Link DXS-3600 Series Reference Manual page 1165

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Usage Guideline
This command cannot be applied to a port when the medium of the port interface is fiber.
Example
This example shows how to configure the MDIX state of interface eth1/1/1 to auto:
Switch# configure terminal
Switch(config)# interface eth1/1/1
Switch(config-if)# mdix auto
Switch(config-if)#
102-5 speed
This command is used to configure the physical port interface's speed settings. Use the no form of
command to revert to the default setting.
NOTE: 10G does not support speed configurations of 10Mbps and 100Mbps.
speed {10 | 100 | 1000 [master | slave] | 10giga [master | slave] | 40giga | auto [SPEED-LIST]}
[rj45 | sfp]
no speed [rj45 | sfp]
Parameters
10
100
1000
master | slave
10giga
master | slave
40giga
auto
SPEED-LIST
rj45
Specifies to force the speed to 10Mbps.
Specifies to force the speed to 100Mbps.
Specifies that for copper ports, it forces the speed to 1000Mbps and
the user must manually set that the port operates as master or slave.
Specifies that for fiber ports (1000BASE-SX/LX), the port will disable
the auto-negotiation.
Specifies the port operates as master or slave timing. This parameter
is only applicable to 1000BASE-T connections.
Specifies to force the speed to 10Gbps.
Specifies the port operates as master or slave timing. This parameter
is only applicable to 10GBASE-T connections.
Specifies to force the speed to 40Gbps.
Specifies that for copper ports, it specifies to determine the speed and
flow control via auto-negotiation with its link partner.
Specifies that for fiber ports (1000BASE-SX/LX), it enables the auto-
negotiation option. Auto-negotiation will start to negotiate the clock and
flow control with its link partner.
(Optional) Specifies a list of speeds that the switch will only auto-
negotiate to. The speed can be 1000, and/or 10giga. Use a comma (,)
to separate multiple speeds. If the speed list is not specified, all speed
will be advertised.
(Optional) Specifies to configure speed for RJ45 media. For combo
1165