D-Link DXS-3600 Series Reference Manual page 1110

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
None.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to configure the system's location information on the switch.
Example
This example shows how to configure the system's location information with the string "HQ 15F".
Switch# configure terminal
Switch(config)# snmp-server location HQ 15F
Switch(config)#
95-9 snmp-server name
This command is used to configure the system's name information. Use the no command to remove the
setting.
snmp-server name NAME
no snmp-server name
Parameters
NAME
Default
By default, this name is "Switch".
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to configure the system's name information on the switch.
Example
This example shows how to configure the system's name to "SiteA-switch".
Switch# configure terminal
Switch(config)# system-name SiteA-switch
Switch(config)#
Specifies the string that describes the host name information. The
maximum length is 255 characters. As a suggestion do not configure
the hostname longer than 10 characters.
1110