D-Link DXS-3600 Series Reference Manual page 1123

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Command Default Level
Level: 12.
Usage Guideline
To create a SMNP user, specify the security model that the user uses and the group that the user is
created for. To create an SNMPv3 user, the password used for authentication and encryption needs to be
specified.
An SNMP user is unable to be deleted if it has been associated with a SNMP server host.
Example
This example shows how the plain-text password is configured for the user "user1" in the SNMPv3 group
public.
Switch# configure terminal
Switch(config)# snmp-server user user1 public v3 auth md5 authpassword priv
privpassword
Switch(config)#
This example shows how the MD5 digest string is used instead of the plain text password.
Switch# configure terminal
Switch(config)# snmp-server user user1 public v3 encrypted auth md5
00112233445566778899AABBCCDDEEFF
Switch(config)#
95-22 snmp-server view
This command is used to create or modify a view entry. Use the no command to remove a specified
SNMP view entry.
snmp-server view VIEW-NAME OID-TREE {included | excluded}
no snmp-server view VIEW-NAME
Parameters
VIEW-NAME
OID-TREE
included
excluded
Default
VIEW-NAME
Restricted
Restricted
Specifies the name of the view entry. The valid length is 1 to 32
characters. The syntax is general string that does not allow spaces.
Specifies the object identifier of the ASN.1 sub-tree to be included or
excluded from the view. To identify the sub-tree, specify a text string
consisting of numbers, such as 1.3.6.2.4, or a word, such as system.
Use the asterisk (*) wildcard in a single sub-identifier to specify a sub-
tree family.
Specifies the sub-tree to be included in the SNMP view.
Specifies the sub-tree to be excluded from the SNMP view.
OID-TREE
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1123
View Type
Included
Included