D-Link DXS-3600 Series Reference Manual page 1179

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
no aaa new-model
# AAA END
end
# PRIVMGMT
configure terminal
# COMMAND LEVEL START
# COMMAND LEVEL END
# LEVEL START
# LEVEL END
# ACCOUNT START
# ACCOUNT END
# LOGIN START
# LOGIN END
103-12 show startup-config
This command is used to display the content of the startup configuration file.
show startup-config
Parameters
None.
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command displays the configuration settings that the system will be initialized with.
Example
This example shows how to display the content of the startup configuration file.
Switch# show startup-config
#-------------------------------------------------------------------------------
#
#
#
#
#
#-------------------------------------------------------------------------------
# STACK
DXS-3600-28SC Gigabit Ethernet Switch
Firmware: Build 2.00.012
Copyright(C) 2013 D-Link Corporation. All rights reserved.
<Output Truncated>
Configuration
1179