D-Link DXS-3600 Series Reference Manual page 1066

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
Level: 15.
Usage Guideline
Use this command to turn on or turn off the IPv6 RIP packet transmitting debug switch. When one IPv6
RIP protocol packet is sent out, the debug information will be print if the IPv6 RIP debug function is turned
on.
Example
This example shows how to turn on the IPv6 RIP packet transmitting debug switch.
Switch# debug ipv6 rip packet-transmitting
Switch#
Send a RIPng response packet to FE80::1 , Index 1
88-16 debug ipv6 rip route
This command is used to turn on the IPv6 RIP route debug switch. To turn off the IPv6 RIP route debug
switch, use the no form of this command.
debug ipv6 rip route
no debug ipv6 rip route
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to turn on or turn off the IPv6 RIP route debug switch. When one IPv6 RIP route is
added, updated or deleted, the debug information will be print if the IPv6 RIP debug function is turned on.
Example
This example shows how to turn on the IPv6 RIP route debug switch.
Switch# debug ipv6 rip route
Switch#
Add a Static route to RIPng route table dst= 2000::1 nexthop= FE80::1
1066