Show Boot - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch CLI Reference Guide
This example shows how to do software download via the out of band management port.
Switch# configure terminal
Switch(config)# ip rcp source-interface mgmt0
Switch(config)#
103-10

show boot

This command is used to display the boot configuration file and the boot image setting.
show boot [unit UNIT-ID]
Parameters
UNIT-ID
Default
None.
Command Mode
User EXEC or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the boot configuration file and the boot image setting.
Example
This example shows how to display system boot information.
Switch# show boot
Unit 1
Boot image: c:/bootimage.had
Boot config: c:/def_usr.cfg
Unit 2
Boot image: c:/bootimage.had
Boot config: c:/def_usr.cfg
Switch#
103-11 show running-config
This command is used to display the commands in the running configuration file.
show running-config [effective | all] [interface INTERFACE-ID]
(Optional) Specifies the unit to be displayed.
1177