Vty Mac-Sa Filter Support; Role-Based Access Control - Dell S6100 Configuration Manual

how to deny incoming connections from subnet 10.0.0.0 without displaying a login prompt. The example uses TACACS+ as the
authentication mechanism.
Example of Configuring VTY Authorization Based on Access Class Retrieved from the Line (Per Network Address)
Dell(conf)#ip access-list standard deny10
Dell(conf-ext-nacl)#permit 10.0.0.0/8
Dell(conf-ext-nacl)#deny any
Dell(conf)#
Dell(conf)#aaa authentication login tacacsmethod tacacs+
Dell(conf)#tacacs-server host 256.1.1.2 key Force10
Dell(conf)#
Dell(conf)#line vty 0 9
Dell(config-line-vty)#login authentication tacacsmethod
Dell(config-line-vty)#
Dell(config-line-vty)#access-class deny10
Dell(config-line-vty)#end
(same applies for radius and line authentication)

VTY MAC-SA Filter Support

Dell Networking OS supports MAC access lists which permit or deny users based on their source MAC address.
With this approach, you can implement a security policy based on the source MAC address.
To apply a MAC ACL on a VTY line, use the same access-class command as IP ACLs.
The following example shows how to deny incoming connections from subnet 10.0.0.0 without displaying a login prompt.
Example of Configuring VTY Authorization Based on MAC ACL for the Line (Per MAC Address)
Dell(conf)#mac access-list standard sourcemac
Dell(config-std-mac)#permit 00:00:5e:00:01:01
Dell(config-std-mac)#deny any
Dell(conf)#
Dell(conf)#line vty 0 9
Dell(config-line-vty)#access-class sourcemac
Dell(config-line-vty)#end

Role-Based Access Control

With Role-Based Access Control (RBAC), access and authorization is controlled based on a user's role. Users are granted permissions
based on their user roles, not on their individual user ID. User roles are created for job functions and through those roles they acquire the
permissions to perform their associated job function.
This chapter consists of the following sections:
• Overview
• Privilege-or-Role Mode Versus Role-only Mode
• Configuring Role-based Only AAA Authorization
• System-Defined RBAC User Roles
• Creating a New User Role
• Modifying Command Permissions for Roles
• Adding and Deleting Users from a Role
• Role Accounting
• Configuring AAA Authentication for Roles
• Configuring AAA Authorization for Roles
• Configuring an Accounting for Roles
Security 781