Adding Trunks To A Trunk Group - Avaya Communication Manager Administrator's Manual

Adding Trunks to a Trunk Group

Use this procedure to add new trunks or to change the assignment of existing trunks. To
change the assignment of existing trunks, remove them from their current trunk group and add
them to the new group.
Before you start
You must add a trunk group before you can assign and administer individual trunks. To add a
new trunk group, see the instructions in this chapter for the type of group you want to add.
Instructions
As an example, we will assign 5 trunks to a new tie trunk group, trunk group 5. We'll use ports
on several circuit packs for members of this group.
To assign trunks to trunk group 5:
1. Type change trunk-group 5 and press Enter.
The Trunk Group
2. Move to the Group Member Assignments page.
Some of the fields on this screen won't appear for every trunk group.
screen appears.
Adding Trunks to a Trunk Group
Issue 1 June 2005 439