Avaya Communication Manager Administrator's Manual page 93

To merge an extension to a telephone with TTI, complete the following steps from the telephone
you want to merge:
1. Dial the TTI merge FAC.
- If the code is correct, you receive dial tone.
- If the code is not correct, you receive intercept tone.
2. Dial the TTI security code from the telephone you want to merge.
- If the code is correct, you receive dial tone.
- If the code is not correct, you receive intercept tone.
3. Dial the extension of the telephone you want to merge.
- If the extension is valid, you receive confirmation tone, which may be followed by dial
tone. (It is possible to receive intercept tone immediately following the confirmation tone.
If this happens, you need to attempt the merge again.)
- If the extension is valid, but the extension is being administered, you receive reorder
tone. Try the merge again later.
- If the extension is invalid, you receive intercept tone.
- If the system is busy and cannot complete the merge, you receive reorder tone. Try the
merge again later.
- If the telephone has a download status of pending, you receive reorder tone. You need to
change the download status to complete to successfully complete the TTI merge.
TTI separation from a telephone
To complete a TTI separation, complete the following steps from the telephone that needs to be
separated:
1. Dial the TTI separate FAC.
2. Dial the TTI security code.
- If the code is correct, you receive dial tone.
- If the code is not correct, you receive intercept tone.
3. Dial the extension of the telephone to be separated.
- If you have dialed the extension of the telephone currently merged with this telephone,
you receive confirmation tone.
- If you have dialed the extension of the telephone currently merged with this telephone,
but the extension is being administered, you receive reorder tone. Try the separation
again later.
- If you have not dialed the extension of the telephone currently merged with this
telephone, you receive intercept tone.
- If the system is busy and cannot complete the separation, you receive reorder tone. Try
the separation again later.
Using TTI to Move Phones
Issue 1 June 2005 93