Avaya Communication Manager Administrator's Manual page 928

Screen Reference
AAR/ARS Dial Tone Required
A second dial tone provides feedback to the user that additional dialing can occur.
Valid entries
y/n
Abbreviated Dial Programming by Assigned Lists
Valid entries
y
n
ACA Referral Calls
Indicates where ACA referral calls generate. This field only appears when the Automatic
Circuit Assurance (ACA) Enabled field is y.)
Valid entries
local
primary
remote
928 Administrator Guide for Avaya Communication Manager
Usage
Enter y to indicate a second dial tone is to be given to
the calling party on a incoming tie or DID trunk call that
is to be routed via AAR/ARS.
Usage
Enter y to allow programming by station's assigned list.
Enter n if using Program Access code to indicate which
personal list is to be programmed.
Usage
Local referral calls generate on and for the local switch.
Primary referral calls generate on the local switch for
remote servers/switches as well as the local switch.
Remote referral calls generate at another server in a
DCS network. In this case, the remote node number
must also be entered. The remote node number is the
same node number as defined on the Dial Plan screen.
Also, ACA button status transmits to other servers/
switches when in a DCS network.