Dcp Data Modules - Avaya Communication Manager Administrator's Manual

Table 6: Call-progress messages (continued)
Message
INVALID
ADDRESS
WRONG
ADDRESS
PLEASE ANS-
TRANSFER
CONFIRMED
OTHER END
DISCONNECTE
D
WAIT
WAIT, XX IN
QUEUE

DCP data modules

Data-terminal dialing
DCP data-terminal dialing allows a user to set up and disconnect data calls directly from a data
terminal as follows.
1. At the DIAL: prompt, the user types the data number. The message RINGING displays.
2. If the call is queued, the message WAIT, XX IN QUEUE displays. The queue position XX
updates as the call moves up in queue.
3. To originate and disconnect a call, the user presses BREAK. If the terminal does not
generate a 2-second continuous break signal, the user can press originate/disconnect on
the data module.
4. The user can enter digits at the DIAL: prompt.
Application Meaning
DCP Entered name is not in
alphanumeric-dialing table.
BRI Entered name is not in
alphanumeric-dialing table.
DCP, BRI Originating telephone user
transferred call to data module using
One-Button Transfer to Data.
DCP Data Call Return-to-Voice is
occurring.
DCP, BRI Equivalent to confirmation tone.
Feature request is accepted, or call
has gone to a local coverage point.
DCP, BRI Endpoint has terminated call.
DCP, BRI Call is disconnected.
DCP, BRI Normal processing continues.
DCP Call is in a local hunt-group queue.
Data Call Setup
2 of 2
Issue 1 June 2005 509