Avaya Communication Manager Administrator's Manual page 730

Screen Reference
Valid entries
alt-frl
Attendant Control of Trunk Group Access
act-tr-grp
deact-tr-g
class-rstr
em-acc-att
hold
pos-busy
serial-cal
override
intrusion
dont-split
730 Administrator Guide for Avaya Communication Manager
Usage
Alternate FRL. Alternate facility restriction level; allows the attendant
to activate or deactivate the AFRL feature. When activated, this
allows the originating device (lines or trunks) to use an alternate set
of the facility restriction levels to originate a call (1 per console).
Activate trunk group access; allows the attendant to control a trunk
group. All calls going to the trunks are routed to the attendant (1 per
console).
Deactivate trunk group access; allows the attendant to release
control of a trunk group (1 per console).
Display Class of Restriction. Used to display the COR associated
with a call (1 per console).
Emergency Access to the Attendant. The associated status lamp is
flashed when there are one or more calls on the emergency
attendant queue (1 per console).
Hold. When the Hold button is pressed while the attendant is active
on a loop, the party on the loop is put on hold and the call type
button associated with the loop is lit (1 per console).
Position Busy. When this button is pushed, the attendant is put into
position busy mode, the "Pos Avail" light is turned off, and the light
associated with the pos-busy button is lit. Pushing the pos-busy
button a second time takes the console out of "position busy" mode,
turns on the "Pos Avail" light and turns off the light associated with
the pos-busy button.
If the pos-busy button is administered on a 2-LED button, the top
LED flashes when the last attendant goes into "Position Busy"
mode. Otherwise, if the button has only one LED, the single LED
associated with the pos-busy button flashes (1 per console).
Serial Call. This button allows the attendant-extended calls to return
to the same attendant if the trunk remains off-hook (1 per console).
Attendant Override. This button enables the attendant to override
diversion features such as, Call Forwarding, Call Coverage, and so
on (1 per console).
Call Offer. Depression of this button allows the attendant to extend a
call when the called party is active on another call (1 per console).
Don't Split. This button allows the attendant to not split away a call
when dialing (1 per console).
2 of 4