Avaya Communication Manager Administrator's Manual page 55

4. Type 2 in the Total Length column. Press Tab to move to the next field.
5. Type fac in the Call Type column.
6. Press Enter to save your changes.
Changing feature access codes
Feature access codes (FAC) allow users to activate and deactivate features from their phones.
A user who knows the FAC for a feature does not need a programmed button to use the feature.
For example, if you tell your users that the FAC for the Last Number Dialed is *33, then users
can redial a telephone number by entering the FAC, rather than requiring a Last Number Dialed
button.
Many features already have factory-set feature access codes. You can use these default codes
or you can change them to codes that make more sense to you. However, every FAC must
conform to your dial plan and must be unique. For more information about the dial plan, refer to
Understanding the Dial Plan
Let us try an example. If you want to change the feature access code for Call Park to *72:
1. Type change feature-access-codes and press Enter.
The Feature Access Code
2. Move the cursor to the Call Park Access Code field.
3. Type *72 in the access code field over the old code.
4. Press Enter to save your changes.
If you try to enter a code that is assigned to a feature, the system warns you of the duplicate
code and does not allow you to proceed until you change one of them.
Tip:
To remove any feature access code, merely delete the existing FAC and leave
Tip:
the field blank.
on page 50.
screen appears.
Understanding the Dial Plan
Issue 1 June 2005 55