Avaya Communication Manager Administrator's Manual page 833

ITC
(Information Transfer Capability) Used with 7500, Announcement, data-line, Netcon, Processor/
Trunk (pdm selection), Processor Interface, and System Port Data Modules. Appears only
when, on the Trunk Group screen, the Comm Type field is 56k-data or 64k-data. Indicates
type of transmission facilities to be used for ISDN calls originated from this endpoint. Does not
display for voice-only or BRI stations.
Valid entries
restricted
unrestricted
Link
Used with X.25, Ethernet, Point-to-Point, and Processor Interface (used with DEFINITY CSI
only) data modules. See Administration for Network Connectivity for Avaya Communication
Manager, 555-233-504 for more information. This field is in different locations on the screen for
different data module types.
Valid entries
1 to 99
Maintenance Extension
Used with Netcon and Processor Interface Data Modules.
Valid entries
Enter the extension number required
to perform maintenance functions on
the standby netcon physical channel
in a duplicated system.
Usage
Either restricted or unrestricted transmission facilities
are used to complete the call. A restricted facility is a
transmission facility that enforces 1's density digital
transmission (that is, a sequence of 8 digital zeros are
converted to a sequence of 7 zeros and a digital 1).
Only unrestricted transmission facilities are used to
complete the call. An unrestricted facility is a
transmission facility that does not enforce 1's density
digital transmission (that is, digital information is sent
exactly as is).
Usage
Enter a communication interface link number.
Usage
The standby remote loop
around tests fails if this field is
not administered.
Issue 1 June 2005
Data Module
833