Avaya Communication Manager Administrator's Manual page 562

Administering Media Servers
Figure 207: Enable File Transfer screen
enable filexfer a03
2. Type a 3-6 alphabetic character login in the Login field.
3. Type a 7-11 character password (one character must be a number) in the first Password
field.
4. Retype the same password in the second Password field.
5. Type y in the Secure? field. Press Enter.
SFTP is enabled on the circuit pack, and the login/password are valid for 5 minutes.
To disable a secure FTP (SFTP) session on a CLAN or VAL circuit pack:
1. Type disable filexfr [board location] and press Enter.
SFTP is disabled on the circuit pack.
Using Telnet over the Customer LAN
Note:
For ease of administration, it is recommended that you use the Avaya Terminal
Note:
Emulator, instead of Telnet, whenever possible.
To use Telnet over the customer LAN:
1. Make sure you have an active Ethernet (LAN) connection from your computer to the Media
Server.
2. Access the telnet program; for example:
- On a Windows system, go to the Start menu and select Run.
- Type telnet <server_IP_address> 5023. You might also type the server name if
your company's DNS server has been administered with the media server name.
3. When the login prompt appears, type the appropriate user name (such as cust or craft).
4. When prompted, enter the appropriate password or ASG challenge.
5. If you log in as craft, you are prompted to suppress alarm origination. Generally you should
accept the default value (yes).
562 Administrator Guide for Avaya Communication Manager
ENABLE FILE TRANSFER
Login:______
Password:___________
Password:___________
Secure?
Page 1