Avaya Communication Manager Administrator's Manual page 76

Planning the System
Station Lock is activated by pressing a telephone button, which lights the button indicator, or
dialing a FAC.
Analog and XMOBILE stations must dial a FAC to activate the feature. The user hears a special
dial tone on subsequent origination attempts from the telephone to indicate that the lock feature
is active.
Digital stations (including DCP, BRI, IP hardphones and softphones) access Station Lock with a
feature button or via a FAC. If a digital station has a Station Lock button but activates the feature
with the FAC, the LED for the button lights and no special dial tone is provided. However, if a
digital station does not have a Station Lock button and activates the feature with the FAC, a
special dial tone is provided.
A station can be locked or unlocked from any other station if the FAC is used and the Station
Security Code is known. The attendant console can never be locked but can be used to lock or
unlock other stations. A station also can be locked or unlocked via a remote access trunk.
Interactions
Attendant Console
●
Station Lock cannot be used for attendant consoles but it can be assigned to regular digital
stations that might also have console permissions. The FAC cannot be used to activate
Station Lock for the attendant console, but the FAC can be dialed from the attendant
console in an attempt to remotely activate or deactivate Station Lock for another station.
Personal Station Access (PSA)
●
Station Lock can be used for PSA stations as long as they are associated with an extension.
When stations are disassociated, Station Lock cannot be activated.
Remote Access
●
After a remote user dials a valid barrier code, the user receives system dial tone. To
activate/deactivate Station Lock, the user must dial the FAC, then the extension number,
then the security code number.
76 Administrator Guide for Avaya Communication Manager