Avaya Communication Manager Administrator's Manual page 117

Figure 39: TFTP Server Configuration screen
change tftp-server
Local Node Name:
TFTP Server Node Name:
TFTP Server Port: 69
File to Retrieve:
Filename in Memory:
7. In the Local Node Name field, enter the valid local node name from the IP Node Names
screen.
The node must be assigned to a CLAN ip-interface or procr (processor CLAN).
8. In the TFTP Server Node Name field, enter the valid TFTP server node name from the IP
Nodes Names screen.
9. In the TFTP Server Port field, enter the TFTP server port number from where the file
download begins.
10. In the File to Retrieve field, enter the name of the file to be retrieved.
11. Press Enter to save your changes.
The file transfer begins.
12. Type display tftp-server and press Enter to view the status of the file transfer.
A File download successful message appears when the file transfer completes. It also
displays the file size and the file name in memory.
Downloading firmware to a single station
You must have console permissions to download someone else's phones.
Note:
Steps 1 through 3 need be done only once to set up the FAC for file downloads.
Note:
Thereafter, start at step 4 to download files.
To set up a FAC for file downloads:
1. Type change feature-access-codes and press Enter.
The Feature Access Code (FAC) screen appears. Click Next until you see the Station
Firmware Download Access Code field.
TFTP Server Configuration
File Status:
File Size:
2420/2410 DCP telephone
Page 1 of 1
Issue 1 June 2005 117