Avaya Communication Manager Administrator's Manual page 760

Screen Reference
Remove # From Called Number
Valid entries
y
n
Secondary Output Endpoint
Appears when the Secondary Output Format field is administered.
Valid entries
eia
Extension
number
CDR1, CDR2
Secondary Output Format
Controls the format of the call records sent to the secondary output device.
!
CAUTION:
Only qualified (Avaya) service personnel should administer a secondary output
CAUTION:
device. This option may cause loss of data when the buffer contains large
amounts of data.
Valid entries
customized
int-direct
int-process
lsu
unformatted
760 Administrator Guide for Avaya Communication Manager
Usage
Enter y to have the "#" (or "E") symbol removed from
the Dialed Number field of the call detail record. You
might need to verify that your output device can accept
this format.
Enter n to have the trailing "#" (or "E") symbol appear in
the Dialed Number field whenever inter-digit time out
occurs or users dial # to indicate the end of dialing.
Usage
Use this if the secondary output device is connected to the
eia port.
This is the extension of the data module (if used) that links
the secondary output device to the server running Avaya
Communication Manager.
Use this value if the CDR device is connected over a TCP/IP
link, and this link is defined as either CDR1 or CDR2 on the
IP Services screen.
Usage
These are the only formats you can use for a secondary
output device. The format must be compatible with your
call accounting software. Verify this through your vendor
or the accounting system documentation.