Avaya Communication Manager Administrator's Manual page 223

To determine if Directed Call Pickup is enabled on your system:
1. Type change system-parameters features and press Enter.
The Feature-Related System Parameters
2. Move to the Directed Call Pickup? field and enter y.
3. Press Enter to save the changes.
Now we will modify extension 4444 to allow directed call pickup. For this example, assume that
the Can Use Directed Call Pickup field for COR 5 is set to Y.
1. Type change station 4444 and press Enter.
The Station
2. In the COR field, enter 5.
3. Press Enter to save your changes.
Setting up "simple" extended group pickup
Let us add a pickup group to an existing extended group where all members of the extended
group pick up each other's calls. We will add pickup group 6 to the existing extended group 56.
To create a simple extended pickup group:
1. Type change system-parameters features and press Enter.
The Feature-Related System Parameters
2. In the Extended Group Call Pickup field, type simple.
Permits feature access codes to be administered.
3. Press Enter to save your changes.
4. Type change feature-access-codes and press Enter.
The Feature Access Code
5. In the Extended Group Call Pickup Access Code field, type the desired FAC.
See the dial plan to enter the correct sequence and number of digits.
6. Press Enter to save your changes.
7. Type add pickup-group next and press Enter.
The Pickup Group
screen appears.
screen appears.
screen appears.
screen appears.
screen appears.
Adding Call Pickup
Issue 1 June 2005 223