Administration commands
System-Parameters Customer-Options
To enable the MMCH feature, you need to purchase a new license file.
System-Parameters Features screen
The default bandwidth for MMCH calls is defined on the System-Parameters Features screen.
Note:
Originating a multimedia call with the mm-call button will originate a call
Note:
according to the Default Multimedia Parameters selected on the System
Parameters -Features screen.
This default parameter will be either 2x56 or 2x64.
●
The bearer capability of the multimedia calls will either be 56K or 64K and the bandwidth
●
will be 2B channels.
Data module screen
The H.320 DVC system should contain a BRI interface. You must connect this BRI interface to
a port on a TN556 BRI circuit pack and administer it as a BRI data module.
You may administer the data endpoint type as 7500 (recommended) or WCBRI.
●
The fields for multimedia are the same on either screen.
●
The administration for a Basic mode and an Enhanced mode data module are exactly the
●
same.
Multimedia Call Handling
Issue 1 June 2005
323