Setting up a trunk group with signal group assignment
You essentially make the settings for the higher levels of the protocol and channel allocation (bundling).
Command
add trunk-group x (creates a new trunk group)
change trunk group x (to change the settings)
Settings
You must change the following settings on page 1.
Setting
Group Type
COR
TN
TAC
Carrier Medium
Dial Access
120 User Manual CIE 1.0 System Administration
Setting
Explanation
isdn
-
95
Class of Restriction
The customer's entry may differ
2
In the example, 2 because two tenants are used
*86
In the example, *86 trunk assignment code
H323
H.323
y
-