Avaya Communication Manager Administrator's Manual page 594

Collecting Billing Information
Figure 220: Trunk Group screen
Group Number: 2
Group Name: OUTSIDE_CALL_______________ COR: 1_
Direction: two-way_
Dial Access? n
Queue Length: 0__
Service Type: public-ntwrk
TestCall BCC: 4
TRUNK PARAMETERS
Supplementary Service Protocol: a
Connected to Toll? n
Calling Number - Delete: ___ Insert: _______________ Numbering Format: _______
Disconnect Supervision - In? y
Answer Supervision Timeout: 0__
2. In the CDR Reports field, type y.
This ensures that the AOC information appears on the CDR report.
3. Verify that Service Type is public-ntwrk.
4. In the Supplementary Service Protocol field, type a.
5. The Charge Advice field, type end-on-request.
This ensures that Communication Manager will place one request for charge information.
This reduces the amount of information passed to Communication Manager and consumes
less processor time than other options.
6. Press Enter to save your changes.
Receiving call-charge information over non-ISDN trunks
In this example, we will administer an existing Direct Inward and Outward Dialing (DIOD) trunk
to receive PPM from the public network.
1. Type change trunk-group 3.
Page 1 of the Trunk Group screen appears with existing administration for this trunk group.
Click the numbered page tabs or Next Page to find fields that appear on subsequent pages
of the Trunk Group screen.
594 Administrator Guide for Avaya Communication Manager
Outgoing Display? n
Far End Test Line No: _______________
Codeset to Send Display: 6
Max Message Size to Send: 260
Trunk Hunt: cyclical
Bit Rate: 1200_
TRUNK GROUP
Group Type: isdn
Busy Threshold: 99_
Auth Code? n
Codeset to Send TCM,Lookahead: 6
Charge Advice: none_____________
Digit Handling(in/out):enbloc/enbloc
QSIG Value-Added Avaya? n
STT Loss: normal
Synchronization: async
Out? n
Page 1 of x
CDR Reports: y
TN: 1__ TAC: ____
Night Service: ________
TestCall ITC: rest
DTT to DCO Loss: normal
Duplex: full