Avaya Communication Manager Administrator's Manual page 850

Screen Reference
SPEEDS
Enter y to select operating speeds as follows:
Valid entries
Low
300, 1200, 2400,
4800, 9600, or
19200
Autoadjust
Answer Text
Appears when the KYBD Dialing field is y. This option enables text feedback that is normally
delivered to the DTE when a call is answered or disconnected. The Answer Text option applies
to DLC-generated text as well as text received from the system. If this option is disabled, the
system still generates the text, but the DLC prevents it from being sent to the device.
This applies to the following messages:
INCOMING CALL
●
ANSWERED
●
DISCONNECTED
●
DISCONNECTED OTHER END
●
850 Administrator Guide for Avaya Communication Manager
Usage
Enter y to instruct the DLC to operate at a low speed
from 0 to 1800 bits per second (bps). Enter n if the KYBD
Dialing field is y.
Enter y beside the desired operating speed. Enter n if the
speed is not desired. The DLC can be any one of these
speeds. The speed is matched for the duration of the call,
from call setup to call takedown.
When multiple speeds are selected (select three or more,
do not select just two speeds) and autoadjust is disabled,
the DTE's speed must be the highest selected speed.
This is required because all feedback text is delivered to
the DTE at the highest selected speed.
Appears when the KYBD Dialing field is y. Enter y which
tells the DLC port to automatically adjust to the operating
speed and parity of the DTE it is connected to. Enter n if
this option is not desired. Autoadjust can be selected with
any of the speeds selected in the previous step.
Autoadjust allows the DLC port to determine the speed
and parity of the DTE and then match itself to this speed.
Autoadjust only applies to calls originated by the user
through Keyboard Dialing.