Avaya Communication Manager Administrator's Manual page 491

Instructions
To set up chime paging, you fill out the necessary fields on the Loudspeaker Paging screen
and then assign chime codes to individual extensions on the Code Calling IDs screen.
As an example, we will set up chime paging for a clothing store with 3 zones. We'll allow users
to page all zones at once, and we will assign a class of restriction of 1 to all zones.
1. Type change paging loudspeaker and press Enter.
The Loudspeaker Paging
Figure 194: Loudspeaker Paging screen
PAGING PORT ASSIGNMENTS
Zone Port
1: 01A0301
2: 01A0302
3: 01A0303
4:
5:
6:
7:
8:
9:
ALL:
2. In the Code Calling Playing Cycles field, type 2.
This field sets the number of times a chime code plays when someone places a page.
3. In the Port field for Zone 1, type 01A0301.
Use this field to assign a port on an auxiliary trunk circuit pack to this zone.
4. In the Code Calling — TAC field type 80.
Use this field to assign the trunk access code users dial to page this zone. You cannot
assign the same trunk access code to more than one zone.
screen appears.
LOUDSPEAKER PAGING
Voice Paging Timeout (sec):
Code Calling Playing Cycles: 2
Voice Paging
TAC COR TN
1
1
1
1
1
1
1
1
1
1
Setting up Chime Paging Over Loudspeakers
CDR? y
Code Calling
TAC COR TN Location:
80 1 1 Men's Department
81 1 1 Women's Department
82 1 1 Children's
1
1
1
1
1
1
89 1 1
Issue 1 June 2005 491