2420/2410 Dcp Telephone - Avaya Communication Manager Administrator's Manual

Managing Telephones

2420/2410 DCP telephone

Downloading firmware to a 2420 or 2410 DCP telephone
You can copy updated application code into Communication Manager via TFTP over a TCP/IP
connection. This eliminates the need to physically remove the telephone and send it to the
factory for the firmware update. This feature is available on all of the servers running Avaya
Communication Manager.
Before you start
1. Type change node-name ip and press Enter.
The IP Node Names screen appears.
2. Administer the TFTP server node name and the local node name (CLAN) and IP address.
3. Press Enter to save your changes.
4. Type change ip-interfaces and press Enter.
The IP Interfaces screen appears.
5. Administer the CLAN ethernet interface or processor CLAN.
6. Press Enter to save your changes.
Downloading the firmware file to Communication Manager
1. Place the file on the TFTP server using TFTP, FTP, HTTP or another file transfer program.
2. From the Web Interface menu, click the Set LAN Security link.
3. Click Advanced. A list of settings that can be enabled or disabled through the use of check
boxes appears.
4. Scroll to tftp and check the box enabling inbound tftp traffic.
5. Click Submit.
6. Log into SAT and enter change tftp-server and press Enter.
The TFTP Server Configuration screen appears.
116 Administrator Guide for Avaya Communication Manager