Avaya Communication Manager Administrator's Manual page 113

Setting up Remote Office on network regions
Now we will set up a network region and show the connections between regions.
Instructions
Set up network region 1:
1. Type add ip-network-region 1 and press Enter.
The IP Network Region
Figure 36: IP Network Region screen
add ip-network-region 1
Region: 1
Location:
Name:
AUDIO PARAMETERS
Codec Set: 1
UDP Port Min: 2048
UDP Port Max: 3049
DIFFSERV/TOS PARAMETERS
Call Control PHB Value: 34
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 7
Audio 802.1p Priority: 6
H.323 IP ENDPOINTS
H.323 Link Bounce Recovery? y
Idle Traffice Interval (sec): 20
Keep-Alive Interval (sec): 6
2. In the Name field, describe the region you are setting up.
3. In the Codec Set field, type the codec set you want to use in this region.
4. In the UDP Port Range field, type the range of the UDP port number to be used for audio
transport.
5. In the Intra-region IP-IP Direct Audio field, type y.
6. In the Inter-region IP-IP Direct Audio field, type y.
7. Move to page 3 to set up connections between regions and assign codecs for inter-region
connections.
Note:
Page 2 of the
Note:
network region, and pages 4 through 19 are duplicates of page 3, providing the
ability to administer up to 250 locations. For details, see the Screen Reference
section on the
screen appears.
IP NETWORK REGION
Home Domain:
Intra-region IP-IP Direct Audio: no
Inter-region IP-IP Direct Audio: no
RTCP MONITOR SERVER PARAMETERS
Use Default Server Parameters? y
Keep-Alive Count: 5
IP Network Region
IP Network Region
IP Audio Hairpinning? y
RTCP Reporting Enabled? y
Server IP Address:
Server Port: 5005
RTCP Report Period(secs): 5
AUDIO RESOURCE RESERVATION PARAMETERS
RSVP Enabled? y
RSVP Refresh Rate(secs): 15
Retry upon RSVP Failure Enabled? y
RSVP Profile: guaranteed-service
RSVP unreserved (BBE) PHB Value: 40
screen shows a list of LSP servers for the
screen.
Setting up Remote Office
Page 1 of 19
. . .
Issue 1 June 2005 113