Avaya Communication Manager Administrator's Manual page 179

Instructions
We will set up the analog diod trunk group 1 to receive calling party information and display the
calling party number on the telephone of the person called.
1. Type change trunk group 1.
The Trunk Group screen for trunk group 1 appears. The Group Type field is already set to
diod.
2. Press Next Page to display the Trunk Features screen.
Figure 57: Trunk Features screen
change trunk-group 1
TRUNK FEATURES
Suppress # Outpulsing? n
Incoming Tone (DTMF) ANI: no
3. Type Bellcore in the Receive Analog Incoming Call ID field.
4. Press Next Page to display the Administrable Timers screen.
Figure 58: Administrable Timers screen
change trunk-group 1
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500
Incoming Dial Guard(msec): 70
END TO END SIGNALING
Tone (msec): 350
5. Type 120 in the Incoming Seizure (msec) field.
6. Press Enter to save your changes.
ACA Assignment? n
Data Restriction? n
Flash Length(msec): 540
Pause (msec): 150
TRUNK GROUP
Measured: none
Receive Analog Incoming Call ID: Bellcore
TRUNK GROUP
Incoming Seizure(msec): 120
Incoming Incomplete Dial Alarm (sec): 255
Displaying ICLID Information
Page 2 of x
Maintenance Tests? y
Page 3 of x
Issue 1 June 2005 179