Avaya Communication Manager Administrator's Manual page 432

Managing Trunks
Figure 180: Trunk Group screen
Group Number: 5__
Group Name: Outside calls
Direction: two-way_
Dial Access? n
Queue Length: 0__
Comm Type: voice
TRUNK PARAMETERS
Trunk Type (in/out): wink/wink___
Outgoing Dial Type: tone_____
Analog Loss Group: ___
Incoming Dial Tone? y
Disconnect Supervision - In? y
Answer Supervision Timeout: 0__
2. In the Group Type field, type tie.
This field specifies the kind of trunk group you're creating.
3. In the Group Name field, type Outside calls.
This name will be displayed, along with the group number, for outgoing calls if you set the
Outgoing Display? field to y. You can type any name up to 27 characters long in this field.
4. In the COR field, type 85.
This field controls which users can make or receive calls over this trunk group. Assign a
class of restriction that's appropriate for the COR calling permissions administered on your
system.
5. In the TAC field, type 105.
This field defines a unique code users can dial to access this trunk group.
6. In the Direction field, type two-way.
This field defines the direction of traffic flow on this trunk group.
7. In the Night Service field, type 1234.
This field assigns an extension to which calls are routed outside of business hours.
432 Administrator Guide for Avaya Communication Manager
BCC: 0
Digit Treatment: __________
Expected Digits:__
TRUNK GROUP
Group Type: tie
COR: 85_
Outgoing Display? n
Busy Threshold: 99_
Auth Code? n
Trunk Flash? n
Incoming Rotary Timeout(sec): 5_
Disconnect Timing(msec): 500_
Out? n
Receive Answer Supervision? y
Page 1 of X
CDR Reports: y
TN: 1__ TAC: 105_
Trunk Signaling Type: ____
Night Service: 1234
Incoming Destination: _______
Incoming Dial Type: tone____
Digits: ____
Sig Bit Inversion: none
Digital Loss Group: ___