Avaya Communication Manager Administrator's Manual page 135

Table 2: Telephone feature buttons (continued)
Button name Button label
in-call-id Coverage
(Type: __ (group #, type,
Grp: ___) name, or ext
#)
inspect Inspect Mode
int-aut-an IntAutoAns
last-numb LastNumb
Dialed
lic-error License Error
link-alarm Link Failure
(link# ___) (link #)
lsvn-halt Login SVN
Description
The Coverage Incoming Call
Identification (ICI) button allows a
member of a coverage answer group
or hunt group to identify an incoming
call to that group even though the
member does not have a display
telephone.
In the Type field, enter c for coverage
answer groups and type of h for a hunt
group. In the Grp field, enter the group
number.
Inspect (display button): allows users
on an active call to display the
identification of an incoming call.
Inspect also allows users to determine
the identification of calls they placed
on Hold.
Internal Automatic Answer: causes
any hybrid or digital station to
automatically answer incoming
internal calls.
Last Number Dialed (redial): originates
a call to the number last dialed by the
station.
License-Error: indicates a major
License File alarm. Pressing the
button does not make the light go out.
The button goes out only after the
error is cleared and Communication
Manager returns to License-Normal
Mode. You can administer this button
on phones and attendant consoles.
Link Alarm: associated status lamp
indicates that a failure has occurred on
one of the Processor Interface circuit
pack data links. Link: Link number — 1
to 8 for multi-carrier cabinets or 1 to 4
for single-carrier cabinets.
Login Security Violation Notification:
activates or deactivates referral call
when a login security violation is
detected.
Telephone Feature Buttons
Maximum
1 per
group-type
per group
1 per
station
1 per
station
1 per
station
1 per
telephone
20 per
system
(Server
CSI)
8 per
station
1 per
system
13 of 21
Issue 1 June 2005 135