Avaya Communication Manager Administrator's Manual page 822

Screen Reference
Pause (msec)
The length of time between DTMF tones for each digit. Displays when the Alert Pager field is y.
Valid entries
20 to 2550
Pin Number
This field can be used for any combination of the pager pin number and pauses or left blank.
Displays when the Alert Pager field is y.
Valid entries
digits 0 to 9
p(ause)
#(pound)
*(star)
Retries
Displays when the Alert Pager field is y.
Valid entries
0 to 10
Retry Interval (sec)
Displays when the Alert Pager field is y. This field is not used unless the Retries field is 1 to 10.
Valid entries
30 to 60
822 Administrator Guide for Avaya Communication Manager
Usage
Enter a number in increments of 10.
Usage
Enter a number up to 15 digits. A pause (about 2
seconds) is for timing of the message. For instance,
after the pin number you may want to have a pause to
allow time for the pager service to set up the correct
pager message box. If the pager service requires you to
submit a PIN number, enter it here.
Usage
The number of times the system tries to send out the
alert message in case of an unsuccessful attempt. This
increases the chances that the pager receives a crisis
alert message.
Usage
The administrable time period (in seconds) between
retries. If an attempt to call the pager fails, the retry call
attempts after the retry interval period.