Avaya Communication Manager Administrator's Manual page 773

Facility Access Trunk Test
An associated feature button (trk-ac-alm) status lamp lights when a successful test attempt
occurs. Pressing one of the alarm buttons (ten maximum) when its associated status lamp is lit
turns off all lamps on all buttons whether the access is still in progress or has completed
.
Valid entries
y/n
Forced Entry of Account Codes
FEAC must be enabled on the System Parameters Customer-Options screen and on the
CDR System Parameters screen.
See Forcing Users to Enter Account Codes
Note:
If a COR requiring entry of account codes is assigned a VDN, the route to
Note:
commands executed by the associated vector will not be successful.
Valid entries
y/n
Usage
Enter y to allow users with this COR to perform Facility
Access Trunk Tests.
on page 591 for more information.
Usage
Enter y to indicate that an account code must be dialed
when making outgoing trunk calls.
If this is y, any telephone assigned the associated COR
must dial an account code before making an outgoing
call. If you set this to y for a COR assigned to a trunk
group, users must dial account codes before calling out
over that trunk group. This may be useful for trunks
used in international calls, and those that are more
expensive. If a call is being routed by ARS, account
code checking is not done on the COR.
Class of Restriction
Issue 1 June 2005 773