Displaying Iclid Information - Avaya Communication Manager Administrator's Manual

Managing Displays
Figure 56: Trunk Group screen
Group Number: 10_
Group Name: Node1 to Node3
Direction: two-way
Dial Access? n
Queue Length: ___
Comm Type: voice
TRUNK PARAMETERS
Trunk Type (in/out): auto/auto-incorrect Incoming Rotary Timeout(sec): 5
Outgoing Dial Type: _________
Incoming Dial Tone? y
Disconnect Supervision - In? y
Answer Supervision Timeout: 0__
2. Type tone in the Incoming Dial Type field.
3. Press Next Page and type *ANI*DNIS in the Incoming Tone (DTMF) ANI field.
4. Press Enter to save your changes.

Displaying ICLID Information

Communication Manager collects the calling party name and number (Incoming Call Line
Identification, or ICLID) received from the central office (CO) on analog trunks.
Before you start
Be sure the Analog Trunk Incoming Call ID field is set to y on the System-Parameters
Customer-Options screen.
See the Hardware Guide for Avaya Communication Manager (555-245-207) for information on
the required circuit pack.
178 Administrator Guide for Avaya Communication Manager
BCC: _
Digit Treatment: __________
TRUNK GROUP
Group Type: tie_____
_______ COR: 10
Outgoing Display? n
Busy Threshold: 99_
Auth Code? n
Trunk Flash? n
ITC? ____
Disconnect Timing(msec): 500
Out? n
Receive Answer Supervision? y
CDR Reports: r
TN: ___ TAC: *10__
Trunk Signaling Type: ____
Night Service: _____
Incoming Destination: 2000_
Incoming Dial Type: tone
Digits: ____
Sig Bit Inversion: none