Avaya Communication Manager Administrator's Manual page 913

Extended Group Call Pickup Access Code
The feature access code (FAC) users enter when a call directed to another pickup group is to be
answered. Users must enter a valid "Pickup Number" following the Extended Group Call Pickup
Access Code to complete the operation.
Facility Test Calls Access Code
Used to place activate a facility test call.
!
SECURITY ALERT:
To ensure the security of your system, leave Facility Test Calls Access Code
SECURITY ALERT:
blank except when actually testing trunks.
Flash Access Code
Used to generate trunk flash. This code ensures that the flash signal is interpreted by the
central office switch, rather than by Avaya Communication Manager.
Group Control Restrict Activation / Deactivation
Used to change the restriction level for all users with a given class of restriction. Requires
console permissions.
Hunt Group Busy Activation/Deactivation
Hunt Group members can dial these codes to place themselves in a busy state, and to become
available again.
ISDN Access Code
Used to place an ISDN call without using ARS, AAR, or UDP.
Last Number Dialed Access Code
Used to redial the last number dialed from this station.
Leave Word Calling Message Retrieval Lock
Used to lock the display module on telephones. The lock function activates at a telephone by
dialing this system-wide lock access code. This prevents unauthorized users from displaying,
canceling, or deleting messages associated with the telephone. The Lock Messages field on
the Station screen also must be enabled.
Feature Access Code
Issue 1 June 2005 913