Dialed String
The dialed string contains the digits that Avaya Communication Manager will analyze to
determine how to process the call. This field allows you to enter up to four digits, so you can
allocate blocks of 1000 numbers even when using a 7-digit dial plan
.
Valid entries
0 to 9, * and #
Percent Full
Displays the percentage (0 to 100) of the system's memory resources that have been allocated
for the dial plan that are currently being used.
Total Length
Valid entries
1 to 2 for attd
1 to 4 for dac
1 to 4 for fac
1 to 7 for ext
2 to 6 for pext
Usage
Enter any combination of 1 to 4 digits. the following
restrictions apply:
The digits * and # may only be used as first digits,
●
and only for the Call Types fac and dac.
For Call Type attd, if the Total Length is 2, the
●
Dialed String must be 2 digits long.
Two Dial Plan entries can use the same Dialed
●
String only if the Dialed String is 1 digit long.
Longer Dialed Strings must all be unique.
A new entry cannot be administered if it causes an
●
existing extension, feature access code, or trunk
access code to become inaccessible.
Usage
Enter the number of digits for this call type. The allowed
length varies by call type. This must be greater than or
equal to the number of digits in the Dialed String.
Dial Plan Analysis Table
Issue 1 June 2005
873