Avaya Communication Manager Administrator's Manual page 150

Managing Telephone Features
2. If you want to use a new telephone for the bridged-to extension, duplicate a station.
For information, see
3. Type change station and the bridged-to extension and press Enter.
The Station
Figure 46: Station screen
change station 75001
FEATURE OPTIONS
LWC Log External Calls? n
Redirect Notification? y
Per Button Ring Control? n
Bridged Call Alerting? n
Active Station Ringing: single
Service Link Mode: as-needed
MWI Served User Type: ______
Recall Rotary Digit? n
Remote Softphone Emergency Calls: as-on-local
Emergency Location Ext: 75001
4. Press Next Page until Per Button Ring Control appears (digital sets only).
If you want to assign ringing separately to each bridged appearance, type y.
●
If you want all bridged appearances to either ring or not ring, leave the default n.
●
5. Move to Bridge Call Alerting.
If you want the bridged appearance to ring when a call arrives at the primary telephone,
type y. Otherwise, leave the default n.
150 Administrator Guide for Avaya Communication Manager
Using Templates to Add Telephones
screen appears.
LWC Reception? spe
LWC Activation? y
CDR Privacy? n
H.320 Conversion? n
Multimedia Mode: basic
Automatic Moves:
AUDIX Name:
STATION
Auto Select Any Idle Appearance? n
Idle Appearance Preference? n
Per Station CPN - Send Calling Number? _
Display Client Redirection? n
Select Last Used Appearance? n
_ Coverage After Forwarding? _
Direct IP-IP Audio Connections? n
on page 83.
Page 2 of X
Coverage Msg Retrieval? y
Auto Answer: none
Data Restriction? n
Restrict Last Appearance? y
Multimedia Early Answer? n
IP Audio Hairpinning? n