Avaya Communication Manager Administrator's Manual page 110

Managing Telephones
6. Fill in the following fields:
Node Name - match the name on the IP Node Names screen.
●
Network Region - this must match the network region on the IP-Interface screen for the
●
circuit packs that connect this remote office. Use display ip-interfaces to find this
information.
Location - match the one set up on the Location screen for this remote office.
●
Site Data - identify the street address or identifier you want to use
●
7. Press Enter to save your changes.
Tip:
Use status remote office to verify that your server running Communication
Tip:
Manager recognizes the Remote Office information. It also displays the
extensions and signaling group you administer next.
Setting up a trunk group
You can modify an existing trunk group or add a new one. In our example, we'll add trunk group
6.
Before you start
Perform Setting up a signaling group
To set up the trunk group for your remote office:
1. Type add trunk group 6.
The Trunk Group screen appears.
110 Administrator Guide for Avaya Communication Manager
on page 111.