Avaya Communication Manager Administrator's Manual page 266

Routing Outgoing Calls
Instructions
For example, we will use ARS to set up local call routing for two Communication Manager
server locations. Our Chicago server is assigned to location 1, and our New York server is
assigned to location 2.
Our example shows a simple local dialing plan. Each location already contains location-specific
routing tables. We'll use route pattern 1 for local service calls and route pattern 2 for local HNPA
calls in the Chicago location.
Tip:
Create location-specific routing by assigning different route patterns for each
Tip:
location.
To define local calls for servers in Chicago and New York:
1. Type change ars analysis location 1 and press Enter.
The AAR and ARS Digit Analysis Table
Figure 113: ARS Digital Analysis Table screen
change ars analysis
Dialed
String
2________________
3________________
4________________
411______________
5________________
555______________
6________________
611______________
7________________
8________________
811______________
9________________
266 Administrator Guide for Avaya Communication Manager
screen for location 1 appears.
ARS DIGIT ANALYSIS TABLE
Location: 1___
Total Route Call
Min Max Pattern Type
7 7 2____ hnpa
7 7 2____ hnpa
7 7 2____ hnpa
3 3 1____ svcl
7 7 2____ hnpa
7 7 deny_ hnpa
7 7 2____ hnpa
3 3 1____ svcl
7 7 2____ hnpa
7 7 2____ hnpa
3 3 1____ svcl
7 7 2____ hnpa
Percent Full:
Node ANI
Num Reqd
___ n
___ n
___ n
___ n
___ n
___ n
___ n
___ n
___ n
___ n
___ n
___ n
Page 1 of X
___