Avaya Communication Manager Administrator's Manual page 52

Planning the System
The Dial Plan Analysis Table works with the Dial Plan Parameters Table for fully defining
your dial plan. The Dial Plan Parameters Table allows you to set system-wide parameters for
your dial plan.
Displaying your dial plan
You might want to take this opportunity to look at and interpret your own dial plan. To display
your system's dial plan:
1. Type display dialplan analysis and press Enter.
Modifying your dial plan
It is easy to make changes to your dial plan. For example, we will add a new range of dial
access codes to the dial plan. We want to be able to assign both FAC and TAC in the 700 to
799 range.
1. Type change dialplan analysis and press Enter.
The Dial Plan Analysis appears.
2. Move the cursor to an empty row.
3. Type 7 in the Dialed String column. Press Tab to move to the next field.
4. Type 3 in the Total Length column. Press Tab to move to the next field.
5. Type dac in the Call Type column.
6. Press Enter to save your changes.
Adding extension ranges
You may find that as your needs grow you want a new set of extensions. Before you can assign
a station to an extension, the extension must belong to a range that is defined in the dial plan.
We will add a new set of extensions that start with 3 and are 4 digits long (3000 to 3999).
To add this set of extensions to the dial plan:
1. Type change dialplan analysis and press Enter.
The Dial Plan Analysis Table
2. Move the cursor to an empty row.
3. Type 3 in the Dialed String column. Press Tab to move to the next field.
4. Type 4 in the Total Length column. Press Tab to move to the next field.
5. Type ext in the Call Type column.
6. Press Enter to save your changes.
52 Administrator Guide for Avaya Communication Manager
screen appears.