Avaya Communication Manager Administrator's Manual page 967

DTMF Tone Feedback Signal to VRU - Connection, Disconnection
This field appears only if DTMF Feedback Signals for VRU on the Customer-Options
System Parameters screen is y.
Valid entries
0 to 9, *, #, A, B,
C, D
blank
Field descriptions for page 7
Figure 349: Feature-Related System Parameters screen
change system-parameters features
CONFERENCE/TRANSFER
Abort Conference Upon Hang-Up?
No Hold Conference Timeout:
ANALOG BUSY AUTO CALLBACK
AUDIX ONE-STEP RECORDING
Apply Ready Indication Tone To Which Parties In The Call?
Interval For Applying Periodic Alerting Tone (seconds):
Usage
Enter the code to connect or disconnect the VRU. This
can be a single digit, or a combination such as *99 to
connect, #99 to disconnect. The tones must be
programmed at the VRU as well.
Blank means that no tone is to be sent to the VRU.
FEATURE-RELATED SYSTEM PARAMETERS
Abort Transfer?
Transfer Upon Hang-Up?
Without Flash?
Feature-Related System Parameters
No Dial Tone Conferencing?
Select Line Appearance Conferencing?
Maximum Ports per Expanded Meet-me Conf:
Announcement:
Voice Mail Hunt Group Ext:
page 7 of x
Unhold?
Issue 1 June 2005 967