Avaya Communication Manager Administrator's Manual page 690

Screen Reference
Destination
Used to route the AC to a desired endpoint. Enter the address of the destination access or data
endpoint. This endpoint is the terminating party of the AC and need not be local to the server on
which the AC is assigned. The entry must be consistent with the local Communication Manager
server's dial plan (that is, the first digits are assigned as an extension, feature access code, or
trunk access code, or DDD Number). If a local extension is entered, it must be assigned to
either an access or data endpoint. Abbreviated Dialing entries may be used in this field.
Valid entries
Extension/string
Enable
Provides the administered connection.
Valid entries
y
n
Name
Valid entries
Up to 27 alphanumeric
characters.
Up to 15 alphanumeric
characters (S8300 Media
Server, S8700 Series
IP-Connect only)
Originator
Enter the assigned access endpoint/data module extension.
Data Line circuit pack
Asynchronous EIA 232C compatible equipment
●
690 Administrator Guide for Avaya Communication Manager
Usage
Enter the assigned access endpoint/data module
extension or valid dialed string.
Usage
Indicates an attempt will be made to establish the AC
when the AC is due to be active.
The AC will not be made or if it is up, it will drop.
Usage
Enter a short identification of the AC.