Avaya Communication Manager Administrator's Manual page 708

Screen Reference
Name
Valid entries
up to 27-character
alpha-numeric filename
(no ., /, :, *, ?, <, >, \,
.wav, or blanks in this
field for VAL circuit packs
only)
Pr
When the Type is field analog, ds1, or aux-trunk, N/A appears in this field. If you want to allow
users with console permissions to change the recording, type n. However, the recording cannot
be changed via FTP or VAL Manager. If you do not want to allow users with console
permissions to change the recording, type y. If you type y in this field, the recording is protected
and cannot be changed. The recording cannot be changed via FTP or VAL Manager either.
Valid entries
y
n
708 Administrator Guide for Avaya Communication Manager
Usage
Describe the announcement message.
For TN2501AP announcements, this field is
required. The value in this field becomes the
filename of the announcement.
The .wav file extension, which is part of the
filename stored on the circuit pack, does not
appear. Do not enter .wav as part of the
filename.
Names on a single VAL circuit pack must be
unique. The system checks for duplicate
filenames on the same VAL circuit pack.
Usage
Enter y to protect the integrated announcement from
being deleted or changed by any user. For VAL, after an
announcement file resides on the circuit pack (recorded
or FTP transfer), you can set this field to y to protect the
file (read-only).
Enter n to allow only users with a console permission
COS to change or delete an announcement. For VAL the
default is n, meaning that the announcement file is
read-write. Use this value when you initially administer
the announcement.