Detailed Description - Avaya Communication Manager Administrator's Manual

!
CAUTION:
When a telephone is unplugged and moved to another physical location, the
CAUTION:
Emergency Location Extension field must be changed for that extension or the
USA Automatic Location Identification data base must be manually updated. If
the Emergency Location Extension field is not changed or if the USA Automatic
Location Identification data base is not updated, the DID number sent to the
Public Safety Acess Point (PSAP) could send emergency response personnel to
the wrong location.

Detailed description

On the Feature-Related System Parameters screen, set the Terminal Translation
Initialization (TTI) Enabled field to y and the TTI State field to voice.
Note:
When a telephone is moved, if there is any local auxiliary power (a power supply
Note:
plugged into a local AC outlet), the telephone must be plugged into an AC outlet
at the telephone's new location. A telephone with remote auxiliary power must be
supplied remote auxiliary power at its new location. If you do not supply auxiliary
power in either case after a telephone is moved, some optional adjuncts (for
example, an expansion module) do not operate.
When you enter always or once in the Automatic Moves field on the Station screen,
Communication Manager adds the extension to its ACTR Move List database. When the
telephone is plugged in, Communication Manager asks the telephone for its serial number and
records the serial number on the ACTR Move List. If you change the entry in the Automatic
Moves field from always or once to no, Communication Manager removes the extension from
the Move List.
Call processing
When a telephone is unplugged while on a call, and a 6400 Serialized telephone or a 2420/
2410 telephone that is administered for automatic moves is plugged into the port within 60
seconds:
both extensions are placed in idle state
●
active calls on either extension are dropped, unless the call is active on a bridged
●
appearance at some other telephone
held calls remain in a hold state
●
any calls ringing on either extension instantly proceed to the next point in coverage or
●
station hunting path, unless the call is ringing on a bridged appearance at some other
telephone
user actions that were pending when the new telephone was plugged in are aborted
●
Using ACTR to Move Phones
Issue 1 June 2005 89