Avaya Communication Manager Administrator's Manual page 580

Administering Media Servers
Figure 212: SNMP Agents
2. Check the Master Agent status field for status of the SNMP Master Agent. If the agent is
down, the Start/Stop button displays Start. In this case, CMSAs cannot operate. To restart
the SNMP master agent, click Start.
If the SNMP master agent is running, the Start/Stop button displays Stop. To stop the
SNMP master agent, click Stop.
3. In the Communication Manager SNMP Agent section, check the Enable Agent box.
If this box is checked, an SNMP manager can interact with Communication Manager using
this CMSA and MIB-II sub-agent within the restrictions administered on this screen.
If this box is not checked, SNMP access to Communication Manager is denied. Disabling
this CMSA does not inhibit access to the SNMP master agent or MIB-II sub-agent running
on this server.
If you check the Enable busy-out / release and QOS parameter setting box, this CMSA
can be used to busyout and release boards, ports, trunk groups, and trunk members. The
CMSA can also be used to set QOS parameter settings (using SNMP commands).
4. In the Password field under Agent ACP Login, enter a new password to change the
password this CMSA uses to log in to the call-processing software.
580 Administrator Guide for Avaya Communication Manager