Location By Region - Avaya Communication Manager Administrator's Manual

Routing Outgoing Calls

Location by Region

Location by Region provides a way to administer location by IP network region. This allows for
the correct date and time information and trunk routing based on the IP network region.
Setting up a remote user by network region and time zone
Instructions
With your system located in New York and a remote user located in Germany, to create the
correct time zone settings:
1. Type change locations and press Enter.
The Locations
Figure 122: Locations screen
change locations
Loc. Name
No
1 Main
xxx _______________ _ __:__
xxx _______________ _ __:__
xxx _______________ _ __:__
xxx _______________ _ __:__
2. On line 11, in the Name field, enter the Communication Manager server associated with the
location (for instance, Germany).
3. In the first Timezone Offset field, enter + to indicate the time is ahead of the system time.
4. In the second Timezone Offset field, enter 08 for the number of hours difference between
this location and system time.
5. In the Daylight Savings field, enter 1 if this country has daylight savings.
6. Press Enter to save your changes.
7. Type change ip-network-map and press Enter.
The IP Address Mapping
280 Administrator Guide for Avaya Communication Manager
screen displays.
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Timezone Daylight- Number ARS Attd Loc.
Offset Savings
Rule
+ 00:00 0
__
__
__
__
screen displays.
Plan FAC FAC Parms. fix
Area
Code
___ ____ ____ __
___ ____ ____ __
___ ____ ____ __
___ ____ ____ __
Page 1 of 1
Pre- Foreign
Domain
Route
Pattern
____ _______
____ _______
____ _______
____ _______