7. In the Maintain Switch Circuit Packs field, type y.
8. In the Maintain Process Circuit Packs field, type y.
9. In the Maintain Enhanced DS1 field, type y.
10. Press Enter to save your changes.
Adding trap destinations
A trap destination is an IP address that needs to receive SNMP alarm traps from the media
server.
Instructions
To add a trap destination:
1. On the main page, under Alarms, click on SNMP Traps.
The SNMP Trap page displays.
Figure 209: SNMP Trap screen
2. Click Add.
The Add Trap Destination screen displays.
SNMP Agents
Issue 1 June 2005
575