Avaya Communication Manager Administrator's Manual page 732

Screen Reference
Valid entries
Attendant Room Status
occ-rooms
maid-stat
vu-display
If 12 HGS buttons are assigned on field descriptions for page 2, Avaya recommends that
●
the night, pos-busy, and hold buttons be reassigned to locations 20, 21, and 3,
respectively. The HGS buttons should then be assigned to the right-most three columns,
as required.
Field descriptions for page 4
Figure 283: Attendant Console screen
change attendant 1
DISPLAY BUTTON ASSIGNMENTS
1: normal____
2: inspect___
3: cov-msg-rt
4: next______
DISPLAY MODULE BUTTON ASSIGNMENTS - Display-type buttons obtain display
●
functions on the associated alphanumeric display. These buttons are noted as [display
button] in the Feature or Function column on the table. Also, several feature buttons can
be administered so that their associated status lamps can be used to provide visual
indications of the associated feature or function. In some cases, the button itself is not
operational. These buttons are noted as [status lamp]. If a Call Cover Msg Rt (cov-msg-rt)
button is assigned, a Leave Word Calling Delete Msg (delete-msg) button and a Next
(next) button must also be assigned.
732 Administrator Guide for Avaya Communication Manager
Usage
Occupied rooms; allows the attendant to see which rooms are
occupied.
Maid status; allows the attendant to see which rooms are in one of
six specified states.
VuStats (vu-display)
telephones and attendants to turn on the VuStats display. The limit
to the number of VuStats feature buttons you can administer
depends on how many feature buttons are available on the
attendant console you are administering. The system is designed to
allow you to set up a separate VuStats display format for each
feature button. Therefore, agents can change the type of
measurements on their display by selecting a different VuStats
feature button.
ATTENDANT CONSOLE
—
This button allows users with display
5: delete-msg
6: call-disp_
7: date-time_
8: timer_____
4 of 4
Page 4 of 4