Avaya Communication Manager Administrator's Manual page 586

Collecting Billing Information
Figure 215: Trunk Group screen
Group Number: 1
Group Name: Outside calls
Direction: two-way
Dial Access? n
Queue Length: 0
Comm Type: voice
Prefix-1? y
TRUNK PARAMETERS
Outgoing Dial Type: tone
Trunk Termination: rc
Disconnect Supervision - In? y
Answer Supervision Timeout: 10
2. In the CDR Reports field, type y.
This tells Communication Manager to create call records for calls made over this trunk
group.
3. Press Enter to save your changes.
4. Type change system-parameters cdr and press Enter.
The CDR System Parameters
586 Administrator Guide for Avaya Communication Manager
TRUNK GROUP
Outgoing Display? n
Busy Threshold: 99
Country: 1
Trunk Type: ground start
Auto Guard? n Call Still Held? n
Out? n
screen appears.
Group Type: co
COR: 85 TN: 1__
Night Service: 1234
Incoming Destination: attd
Auth Code? n Digit Absorption List: _
Trunk Flash? n
Disconnect Timing(msec): 500_
Sig Bit Inversion: none
Trunk Gain: high
Receive Answer Supervision? n
CDR Reports: y
TAC: 105
Toll Restricted? y
Cut-Through? n