Avaya Communication Manager Administrator's Manual page 500

Managing Group Communications
To set up automatic intercom between extensions 2010 and 2011:
1. Type change station 2010 and press Enter.
The Station
Figure 198: Station screen
SITE DATA
Building: _______
ABBREVIATED DIALING
BUTTON ASSIGNMENTS
1: call-appr_
2: call-appr_
3: call-appr_
4: auto-icom_
5: dial-icom_
2. Move to the page with the BUTTON ASSIGNMENTS fields.
3. In BUTTON ASSIGNMENTS field 4, type auto-icom and press Tab.
The Grp and DC fields appear.
4. In the Grp field, type 1.
This is the number of the intercom group. Since an extension can belong to more than one
intercom group, you must assign a group number to intercom buttons.
5. In the DC field, type 2.
This is the dial code for extension 2011, the destination extension.
6. Press Enter to save your changes.
7. Repeat steps 1 to 6 for extension 2011.
Assign a dial code of 1 to 2011's automatic intercom button.
To give a member of a group the ability to make intercom calls to all the other members,
administer a Dial Intercom button on the member's telephone. Type the number of the
intercom group in the Grp field beside the Dial Intercom button.
500 Administrator Guide for Avaya Communication Manager
screen appears.
Room: _______
Jack: _____
Cable: _____
Floor: _______
List1: ________
Grp: 1
Grp: 1
STATION
List2: ________
6: __________
7: __________
8: __________
DC: 2 9: __________
10: __________
Headset? n
Speaker? n
Mounting: d
Cord Length: 0
Set Color: ______
List3: ________