Avaya Communication Manager Administrator's Manual page 817

COVERAGE POINTS
Point1, Point2, Point3, Point4, Point5, Point6
The alternate destinations that comprise a coverage path. Coverage points must be assigned
sequentially beginning with Point 1 (do not leave gaps). Each path can have up to six coverage
points.
Valid entries
extension
attd
h1 to h999
c1 to c750
c1 to c1000 (For
S8300 Media
Server, S8700
Series
IP-Connect,
S8700 Series
Multi-Connect)
Usage
Redirects the call to an internal extension or announcement.
Note:
If entering a Multi-Location Dial Plan
Note:
shortened extension, note the following: When
entering a Multi-Location Dial Plan shortened
extension in a field designed for
announcement extensions, certain
administration end validations that are
normally performed on announcement
extensions are not done, and resultant
warnings or submittal denials do not occur.
The shortened extensions also do not appear
in any display or list that shows
announcement extensions. Extra care should
be taken to administer the correct type of
announcement for the application when
assigning shortened extensions.
Redirects the call to the attendant or attendant group. If the
system has Centralized Attendant Service (CAS), the call
goes to the CAS attendant.
Redirects the call to the corresponding hunt-group. For
example, enter h32 if you want a coverage point routed to
hunt group 32. (See Hunt Group
information.)
Redirects the call to the corresponding coverage answer
group. For example, enter c20 if you want a coverage point
routed to call coverage answer group 20. (See
Answer Group on page 811 for more information.)
on page 1040 for more
Coverage
Issue 1 June 2005
Coverage Path
1 of 2
817